Availability: Available at Supplier
Processing times up to 3 days however most of the time much faster
Availability: Available at Supplier
Processing times up to 3 days however most of the time much faster
Accuracy and terminal performance are the cornerstones of Hornady® Precision Hunter® factory loaded ammunition. Great care has been given by Hornady engineers to develop superior, match-accurate hunting loads that allow the ELD-X® bullet to achieve its maximum ballistic potential.
Propellants used in the Precision Hunter® ammunition line are clean burning and loaded to uniform capacity for consistent shot to shot results regardless of temperature. This attention to detail provides the highest levels of accuracy and performance uniformity for the most demanding and diverse hunting situations.
Featuring the radically superior ELD-X bullet with Heat Shield tip, Precision Hunter is the ideal load for ANY hunting situation because of its effective terminal performance at ALL practical ranges.
Verified by Doppler radar, the Heat Shield tip defies the effects of aerodynamic heating and retains its shape to maintain the highest-in-class BC over its entire trajectory.
Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip combine for radically superior aerodynamic efficiency.
With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high InterLock ring keep the core and jacket together providing 50-60% weight retention.
Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting controlled expansion with a large mushroom and 85-90% retained weight, the bullet provides deep penetration and large cavities. Available as component bullets or in factory loaded Precision Hunter ammunition.
In 2012, Hornady engineers were tasked with creating a new bullet. The main goal was to have a hunting bullet that worked well at all practical distances. Plenty of bullets work well from 0-400 yards, few work well beyond that and none work well at both conventional and extended range.
Extend your range, and never compromise at any distance. Hornady engineers, using state of the art aeroballistics software, Doppler radar and decades of bullet performance knowledge have developed an entirely new class of bullet.
Ballistic Coefficient (BC) values can, and usually do change in value with changes in velocity. Most bullets exhibit a lowering BC as velocity slows. The extent of how much a BC will change depends on each unique bullet shape. When comparing BC’s of different bullets, it is important to use an apples-to-apples approach.
Shipping not available to AU, please try another location.
| SKU | 80462 |
| Barcode # | 090255804621 |
| Brand | Hornady |
| Shipping Weight | 0.4513kg |
| Shipping Width | 0.076m |
| Shipping Height | 0.029m |
| Shipping Length | 0.133m |
Accuracy and terminal performance are the cornerstones of Hornady® Precision Hunter® factory loaded ammunition. Great care has been given by Hornady engineers to develop superior, match-accurate hunting loads that allow the ELD-X® bullet to achieve its maximum ballistic potential.
Propellants used in the Precision Hunter® ammunition line are clean burning and loaded to uniform capacity for consistent shot to shot results regardless of temperature. This attention to detail provides the highest levels of accuracy and performance uniformity for the most demanding and diverse hunting situations.
Featuring the radically superior ELD-X bullet with Heat Shield tip, Precision Hunter is the ideal load for ANY hunting situation because of its effective terminal performance at ALL practical ranges.
Verified by Doppler radar, the Heat Shield tip defies the effects of aerodynamic heating and retains its shape to maintain the highest-in-class BC over its entire trajectory.
Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip combine for radically superior aerodynamic efficiency.
With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high InterLock ring keep the core and jacket together providing 50-60% weight retention.
Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting controlled expansion with a large mushroom and 85-90% retained weight, the bullet provides deep penetration and large cavities. Available as component bullets or in factory loaded Precision Hunter ammunition.
In 2012, Hornady engineers were tasked with creating a new bullet. The main goal was to have a hunting bullet that worked well at all practical distances. Plenty of bullets work well from 0-400 yards, few work well beyond that and none work well at both conventional and extended range.
Extend your range, and never compromise at any distance. Hornady engineers, using state of the art aeroballistics software, Doppler radar and decades of bullet performance knowledge have developed an entirely new class of bullet.
Ballistic Coefficient (BC) values can, and usually do change in value with changes in velocity. Most bullets exhibit a lowering BC as velocity slows. The extent of how much a BC will change depends on each unique bullet shape. When comparing BC’s of different bullets, it is important to use an apples-to-apples approach.
| SKU | 80462 |
| Barcode # | 090255804621 |
| Brand | Hornady |
| Shipping Weight | 0.4513kg |
| Shipping Width | 0.076m |
| Shipping Height | 0.029m |
| Shipping Length | 0.133m |
Copyright © 2024 Oz Gun Mart.
ABN: 36125018108
Address: PO Box A91, Enfield South, NSW, 2133, Australia
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Oz Gun Mart’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Oz Gun Mart’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is PO Box A91, Enfield South, NSW, 2133, Australia. Our ABN is 36125018108. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us at sales@ozgunmart.com.au as soon as possible at the above address. We will promptly correct any information found to be incorrect.
