Kit includes the mounting body incorporating the Lee quick change Breech lock feature. The body accepts our new low cost bullet sizer and punch. The new bullet sizers are produced out of stressproof steel and specially tapered to reduce sizing effort. The bullet sizer is retained in the mounting body with a threaded bottle adapter.
Bullets are sized nose first; this is the most accurate and causes the least distortion. Best of all, no special top punches are required. Will seat and crimp gas checks while sizing.
Great for powder coated or liquid lubricated bullets.
Fits any single stage Breech Lock equipped reloading press. If you don’t have a single stage Breech lock press, but it has a removable die bushing, update it with the 1 1/4-12 or 1 1/2-12 Lee Breech lock update kit.
The Bullet Sizer & Punch sizes are to be used in conjunction with the Breech Lock Bullet Sizer Kit which fits any Breech Lock enabled reloading press. Lee Liquid Alox, a reloading press and the Bullet Sizer & Punch sizes are required to utilize this kit, each sold separately and not included with this item.
1 x Lee Breech Lock Bullet Sizing Kit - 91532 is shipped when ordering this item.
- Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.
- All lead bullets must be lubricated (sold separately), but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.
- Lee recommends the use of Alox bullet lube, (Lee Alox bullet lube is not included in the kit).
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other Oz Gun Mart users shop smarter by writing reviews for products you have purchased.