Lee Bullet Sizer & Punch .224 91505

The New Breech lock bullet sizer allows nose first bullet sizing and you can change size with an inexpensive punch and bullet sizer die. Nose first bullet sizing is the most accurate, distortion free and because you are pushing on the base of the bullet no special nose punches are required.  On the App press (not included with this item), bullets are sized as rapidly as you can operate the press lever.  This is the perfect tool for the now popular powder coated bullets.

Lee Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks. The Bullet Sizer & Punch sizes are to be used in conjunction with the Breech Lock Bullet Sizer Kit which fits any Breech Lock enabled reloading press. Lee Liquid Alox, a reloading press and the Breech Lock Bullet Sizer Kit are required to utilize this kit, each sold separately and not included with this item.

Notes:

• Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.
• All lead bullets must be lubricated (sold separately), but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.
• Lee recommends the use of Alox bullet lube, (Lee Alox bullet lube is not included in the kit).